Anti-Tamper Care Alarm
Sensor Mat - Large
Product Details
Our Anti-Tamper Care Alarm enables a carer to remotely monitor when a patient gets out of a bed or chair.
This manages wandering and alerts of potential fall situations.
The Anti-Tamper Care Alarm has a cord which attaches to the user's clothing, which triggers the alarm if it is pulled tight (i.e. if the patient moves from the bed or chair).
The alarm can be reset by using the supplied remote control, or by entering a pin number into the main unit.
This removes the risk of the alarm being turned off by the user without the carer's knowledge.
The alarm's volume can be set as required and it has an adjustable stand-by timer, enabling the carer to reposition the person without the alarm being triggered.
It has a mounting base and wall hanger.
The Anti-Tamper Care Alarm is made from plastic with a robust rubberised casing.
If required, the alarm can be silenced and connected to a nurse call system.
The additional sensor mat adds even greater security for the user.
This is plugged into the monitor unit and placed beneath the chair of the user.
The Anti-Tamper Care Alarm Mat can then be set to activate the alarm either when pressure is taken off or when it is applied.
Again, this provides an excellent remote activity warning system.
The sensor mat can be used in combination with the Voice Alert Monitor and Anti-Tamper Nursecall Care Alarm to monitor.
Anti-Tamper Care Alarm System Unit dimensions: 40 x 100 x 100mm (1 1/2 x 4 x 4 inches).
Small Sensor Mat size
Length: 250mm (10 inches).
Width: 250mm (10 inches).
Large Sensor Mat size
Length: 760mm (30 inches).
Width: 250mm (10 inches).